CNC760
Step 1. Check bootloader starts Make sure that the bootloader is activated at startup. This is done by removing JP11. And of course, make sure the...
Fri, 20 Aug, 2021 at 11:00 AM
Ensure that jumper JMP11 is removed (as pictured below) When JMP11 is removed, the board will stay in bootloader mode for a moment after being powered ...
Thu, 13 Jan, 2022 at 2:39 PM
Most VFDs have a simple interface for controlling it. They usually have one or two inputs for switching the spindle on and a second input for controlling it...
Mon, 2 Jan, 2023 at 3:21 PM