FAQ
During homing a lower step frequency is used. After homing the higher step frequency is used. If the driver does not operate with the higher step frequency ...
Mon, 24 Jan, 2022 at 8:48 AM
USBCNC was the original name of EdingCNC. This name was at the time chosen because our CNC controllers as one of tge first controllers used USB to communica...
Wed, 24 Nov, 2021 at 1:14 AM
When after pressing reset, you can still not move the axes it is likely the Amp Enable signal has the wrong polarity. Try inverting the Amp Enable sign...
Wed, 24 Nov, 2021 at 2:22 AM
In general, no. We do not offer discounts for a multitude of reasons, such as (but not limited to) pricing agreements with our individual distributors and o...
Thu, 8 Dec, 2022 at 3:35 PM
Short version: No. The EdingCNC software has been designed to have a 1:1 connection to the controller board, so controlling multiple boards at the same ...
Tue, 21 Jul, 2020 at 9:39 AM
LOG 4J is part of Java. We don't use java.
Thu, 23 Dec, 2021 at 10:01 AM
Officially we do not yet support Windows 11. Although there should not be any issues we try to be careful about this. Often Microsoft makes little changes t...
Wed, 15 Jun, 2022 at 10:13 PM
No. The computer performs the calculations necessary to drive the machine. It is not possible to work with the machine without a computer.
Mon, 25 Jul, 2022 at 4:02 PM
Although our controller is used, we advise contacting Felder primarily: https://www.felder-group.com/en-us/products/cnc-machine-centers-c1953/cnc-portal...
Tue, 7 Mar, 2023 at 12:53 PM
Due to higher computational power requirements, only our latest controllers can take advantage of the laser control commands. These controllers include th...
Mon, 24 Apr, 2023 at 12:19 PM